Magnetic signs
for cars and vans

Send us your artwork or ideas of how you would like the magnetic signs look and we can send you a mock-up before they are made if required.

Don't forget to include size, colour and font if you have a preference.

Full colour work can be printed exactly as artwork sent or we can lay it out for you.

Set up charge - £10
Extra set up for over 200 characters @ £2.50 per 100 or part.(each different sign)
Logos - £7.50 per design
Full colour logos or photos up to 300x600mm - £25each

Minimum letter size 17mm
Prices exclude VAT
P&P up to 2m - £6.95
over 2m add 75p per metre

Care of Magnetic signs

Before You Apply Magnetic Signs
The magnetic sign and metal surface should be clean and dry. In any outdoor application, such as car signs,ideally the metal surface should be waxed 2 days before application.

Application Tips for Magnetic Signs
Magnetic Sheeting holds best to flat surfaces and surfaces with slight curves. When the magnetic signs are placed in the wrong position, remove the sign and realign. Do not pull the magnetic sign to realign when it is against the surface, as the material may stretch due to resistance cause by the high magnetic strength. Make sure the entire magnet is against the metal surface (no air pockets). Do not apply to newly repainted surfaces. (90 days for paint

Cleaning Magnetic Signs
Some moisture and dirt could collect behind magnetic signs. Remove and clean both the signs and the surface with mild detergent and allow both to dry. Repeat cleaning process monthly when used in an outdoor environment. For extra assurance, remove and clean signs weekly during harsh weather conditions.

Storing Your Signs when not in use The magnetic sheet is more pliable and easier to work with when it is near room temperature when applied. The best way to store magnetic signs is flat. Avoid laying signs on protruding objects. Make sure it is clean.